Tube Cut
One flexible fiber laser for sheet metal and tube cutting. Process plates, round tubes, square tubes, and profiles with clean edges and stable performance.
Measured Precision
For Production
Tube Cut brings Smart Series motion speed, acceleration, and X/Y axis precision into practical sheet metal cutting.
Maximum Speed
Smart Series motion reaches up to 110 m/min for efficient plate cutting and shorter production cycles.
Fast Axis Response
Maximum acceleration of 1.3g supports agile contour following and rapid movement between cuts.
Positioning Accuracy
X/Y axis positioning accuracy of +/-0.04 mm helps maintain dependable edge quality across sheet jobs.
Repeat Positioning
X/Y repeated positioning accuracy of +/-0.03 mm keeps repeated parts consistent across production runs.
MAX Fiber Laser Source
MFSC-6000C Single-Module CW Fiber Laser
A 6000W single-module continuous fiber laser source for demanding metal cutting, drilling, and welding. It suits new energy, 3C, and precision manufacturing lines that need higher power density, stable beam delivery, and reliable thick-plate processing.
MFSC-3000C Single-Module CW Fiber Laser
A 3000W MFSC-series source built for continuous industrial cutting and welding work. The high-efficiency single-mode platform supports drilling, sheet cutting, welding, cladding, brazing, and surface heat treatment with adjustable output for process control.
MFSC-2000C Single-Module CW Fiber Laser
A 2000W continuous fiber laser source for compact cutting systems and automated production lines. Its single-module design is easy to integrate with machine tools while providing dependable power for daily sheet metal cutting and welding tasks.
Bochu EtherCAT Controller
Bochu FSCUT tube cutting control systems connect chuck rotation, servo motion, cutting gas, nesting, and tube process parameters for stable pipe production.
BOCI Cutting Head
BLT 421T
Medium-Power Tube Cutting
BLT 310T
Compact Tube Cutting
Tube Cut can be paired with Bochu BOCI intelligent cutting heads for stable focus control, process monitoring, and reliable fiber laser cutting performance.
Balanced tube processing
Designed for daily round, square, and profile tube cutting, with practical focus control and maintainable protection for steady production.
Compact tube cutting head
A BLT3 T-series head for small and medium power tube cutting, combining compact structure with stable monitoring and easy service.
Heavy Steel Machine Bed
Tube Cut uses a super-heavy welded steel bed built from thick monolithic plate. Groove welding, stress annealing, and natural aging help release internal stress, keeping the frame stable for accurate sheet cutting.
Thick Steel Structure
Heavy plate construction supports rigidity during cutting
Stress-Relieved Bed
Annealing and aging improve long-term frame stability
Pneumatic Clamping & Support
Tube Cut combines pneumatic chucks with servo roller support for stable, professional pipe processing.
The Pipe Clamping Range is Wide
The pipe clamping range of the Laser Tube Cutting Machine is vast, the Round tube is Φ10-Φ10, and the square tube side length is 10 * 10mm-220mm * 220mm. Support the cutting of various shapes of pipe materials, such as I-beam, channel steel, angle steel, elliptical pipe, waste pipe, multi-deformed pipe, Etc.
Servo motor roller support
When the Tube Plate Fiber Laser Cutting Machine works, it can fix the pipe and effectively solves the deformation problem in the cutting operation of the long line.
Double Pneumatic Chucks, Ultra-short Tailing
The front and rear of Pipe Fiber Laser Cutting Machine chucks are featured by automatic centering and dual-driven rotation, keeping them synchronous. The front chuck is full-stroke, and cutting tailing is further shortened to 50mm by front chuck avoidance cutting.
Precision Motion Control
Tube Cut pairs rigid mechanical transmission with responsive servo motion to support accurate positioning, smooth acceleration, and flexible contour cutting across different sheet sizes and production jobs.
Taiwan YYC rack and pinion components support precise linear transmission with low vibration and controlled backlash, helping the cutting gantry keep repeatable motion over long travel.
Taiwan HIWIN linear guides provide smooth, high-accuracy guidance and strong load capacity, giving the X/Y axes a stable foundation for fine contour cutting.
Inovance servo motors drive the X and Y axes with responsive control, high-resolution feedback, and synchronized gantry motion for flexible acceleration and positioning.
Motoreducer planetary reducers are selected for precise servo transmission, strict quality control, and reliable torque output, helping the axis system keep stable motion under daily cutting loads.
Gas Pressure Management
Tube Cut uses Japanese SMC electro-pneumatic regulation to deliver stable, step-free assist gas pressure for air, nitrogen, and oxygen cutting processes.
Step-free Gas Control
Gas pressure is adjusted proportionally by electric signal, helping operators match output to material and process needs.
Fine SMC Regulation
SMC regulator sensitivity reaches 0.2 kPa on the 100 kPa specification, supporting precise pressure tuning.
Stable Process Response
Linearity is within +/-1% F.S. and hysteresis within 0.5% F.S. for reliable pressure response during cutting.
Electro-pneumatic Regulator
Thermal Management
Tube Cut combines dedicated laser water cooling with electrical cabinet climate control to keep the laser, optics, and CNC electronics operating in a stable temperature environment.
Laser Water Chiller Series
S&A TEYU laser water chillers support fiber laser processing with dedicated temperature control for the laser and optics, intelligent digital operation, reliable water circulation, and communication capability for integration with the laser system.
Electrical Cabinet Cooling Unit
Tongfei MCA enclosure cooling separates internal and external air circulation to block dust, oil mist, and moisture while managing cabinet temperature and humidity. It supports protection alarms, RS485 communication, optional PTC heating, and wall-mounted, embedded, or door-mounted installation.
Upgrade Options
Raycus Global-Series CW fiber lasers provide broad configuration choices, QBH output connection, multiple control modes, good compatibility, and reliable cutting performance.
Upgrade to the Empower control system for streamlined machine operation, coordinated process control, and stable, precise laser cutting performance.
Upgrade to the Empower laser cutting head for reliable beam delivery, stable processing, and consistent cut quality across demanding production tasks.
The three-chuck design improves clamping stability and supports longer tube processing.
* Requires FSCUT5000A controller support.
Automatic loading equipment arranges tubes before feeding and uses loading rollers to reduce waiting time for higher cutting efficiency.
Specifications
Tube Cut machine dimensions and shared laser configuration options at a glance
Ready to
Master Your
Production?
Share your material type, sheet size, thickness range, and production goals. Our engineering team will recommend a Tube Cut configuration for your workshop.
